Q What is the brightness of LC screen can be done?
A outdoor LC screen brightness: 1500-2000 brightness; Indoor LC screen brightness: conventional brightness 360-450 Change brightness to -700-1500 brightness
Q Can the advertising machine and touch all-in-one pc machine work 24 hours all day (7*24 hours)?
A Conventional advertising machines and touch all-in-one machines cannot work 24 hours a day. They only support one-day work (about 12 hours) and up to 3-7 days of uninterrupted aging tests. The service life of the machines is estimated to range from 10,000 to 30,000 hours. If special circumstances re...
Q What is the difference between transparent screen, LCD and OLED screen?
A A. LCD screen is also commonly known as hard screen. At the same time, LCD itself does not have luminous characteristics, so backlight module is required to emit light. OLED screen is a more expensive flexible screen, and OLED screen can emit light independently without backlight module due to its o...
Q What is the difference between IP55 and IP65 protection grade?
A A. The letter IP is the abbreviation of Ingress Protection Rating. The two digits after IP, the first digit is the solid protection level, that is, the dust protection level we are exposed to. The classification range is 0-6; The second number is the liquid protection level, which is commonly known ...
Q What is the difference between a splicing screen and TV?
A A. The brightness of the spliced screen is 450nit -500 nit, which belongs to industrial screen, so it can be used 24 hours a day. However, ordinary TV screens can only work 10-15 hours a day due to the limited service life of the backlight. B. The spliced board is different from the TV board...
Q Nano-film touch with unsmooth lines?
A There is electrostatic interference, please check the use environment and whether it is grounded
Q Nano-film can’t be touched after it is completely connected?
A Please check whether the control card is in good contact with FPC cable.
Q No signal on the blue screen of the monitor?
A Please check whether HDMI, VGA and DVI signals are input normally